I think it is important that new folks know that some of the alternative methods are working. Particulary if the abx are not helping them.
My LLMD suggested I needed to work on the infections/cavitations in my jaws, so I am starting to use it for that first. I probably will be on abx about 1-1/2 to 2 mor months before I will start using the GB4000 for Lyme. I'll probably begin to wean myself off the abx as I am afraid to do too much at one time.
What machine are you using? How long? Are there any particular frequencies you have found to be helpful?
Thanks,
Gail
You are moving in the right direction...Keep it up! To anwser your questions:
1) I have used 5-6 differents machines, but I started out with the predecessor of the GB4000, the B-3 plus amp. This unit really helped me with my Lyme, and so should the GB4000 help you, the GB4000 has even more range than the B-3.
2)I have been rifing for 19 months. Started Rifing on April 6th, 2003 and last day on antibiotics was May 17, 2003. As you can see, I slowly weened myself off abx over a 5-6 week period.
3) The best frequencies for Lyme are the ones "Doug" saw the Lyme bacteria actually die when examining them under a microscope and testing them with various frequencies.
These frequecies are harmonics of 306 hertz, so 306, 610-612, etc. Please note that 27 and 106 hertz are also very effective, but I try not to rife with the lower frequecies, as our body "uses". The GB4000 should come with a book that lists other unseful Lyme frequencies. Also see Bryan's new book or http://www.bioelectric.ws/eng/freq-list.html
which has links for other lists.
Hope this helps,
Ernie
As far as frequencies, I have found the sets that are in the book and ones on some different freq lists, but don't know what you mean by harmonics of 306 hertz. I am truly electronics-illiterate when it gets technical! I have however figured out how to program the GB4000 with frequencies/groups, and have added some from the CAFL that were not programmed in that I thought might help. I also did them in singles so I could maybe tell what I was getting "hits" from if possible.
What do you mean when you say the body uses the lower freqs? Can you tell me what the range is, or how low you mean? I've noticed some of the low freqs in the information I've received with my GB4000 that has been programmed into the channels.
Thanks for the help and encouragement!
Gail
daniella
I agree with your strategy, as time permits, run thru the frequecies, one at a time, on the CAFL lists, and on the GB4000 list. See which freq give you "hits", then follow-up with those.
As far as the harmonics concept goes... don't worry about it. It just means that multiples of a frequency may affect a bacteria in a similar fashion. For example, 306 hertx can kill Borrelia burgdorferi bacteria, but so can 610-612 hertz.
You also might want to join Bryan's Lyme & Rife group at <
In regard to low frequencies, this is a controverial topic. Some feel it is not a big deal, others (like me)would prefer not to risk problems. I prefer not to rife with frequencies less than 100 htz. But our bodies freqencies are much lower. For example, our brain uses delta waves( deep sleep) around 1-3 hertz, theta waves(dreaming) 4-5 hertz, and alpha waves (awake state) 8-13 hertz.
Remember, our electicity in the U.S. run at 60 hertz and it is not bothering anyone, so realistically probably below 30 hertz I would be careful.
daniella,
If you go to Bryan's site ( http://health.groups.yahoo.com/group/Lyme-and-rife/), in the files section, there is section rating different types of rife machines. You may find this helpful.
As far as rife helping with other health issues, check the web out!
The biggest problem the Rife community has is there are few "double blind" type studies showing the effectiveness of rifing, most of the reports are anecdotal. Consequently, this treatment is not readily accepted by mainstream medicine.
I have also pre-ordered a copy of his book, and look forward to reading it!
Gail