I received mine (GB4000/amp) a couple of months ago, and started rifing for Lyme, etc. two weeks ago. It is hard to ease into it because I can't feel anything while I am rifing, although I have had a slight herx within the next 2 days afterward.

I have been able to tell somewhat of a difference already, especially since I started rifing for mycoplasma, babesia and HHV5 and 6 last week. I think it is clearing up a lot of my respiratory symptoms.

Keep us posted on your progress!

What is HHV5 and 6? Is it herpes?

I have a rife machine, and resiratory issues as well, and know it is tick related... on the antibiotics and rifing.

Can you tell me the exact numbers/frequencies you were rifing?

PS! Just looked on the net, should have done this before, did not think, HHV5 is the cytomeg virus.

Ive had herpes since birth, the herpes stomatitis and actually USE it to my advantage at this time. WHY?

When I am doing well with lyme, my herpes canker sores are in remission. When my lyme is not good, I have the herpes active in the mouth. I have also noticed that if my candida gets really bad on antibiotics, the herpes is reactivated.

thanks,

Trish

I very much agree with Skyking. I am rifing, have been for about 2 months, on antibitoics too.

I decided to rife them all, do it all now, or die.

Not a good idea. I was rifing so much so I thought I was going to die.
I am glad I experimented, I now know what I can take, and what happens to me if I rife too much.

I am now trying the rifing once a week, possibly twice, not sure yet.

Did you start with Lyme frequencies or co-infections?

Or general health? Any recvommendations?

Also does anyone have frequencies they found to be extremely helpful? Maybe you could list the best frequecies you've found so far for you...and what it is for(if you feel comfortable) thanks

HHV 5 & 6 are varieties of herpes and cytomegalovirus. I was diagnosed with these and mycoplasma by muscle testing, and believe it has been a big part of my problem.

I have only run these freqs twice, and used the ones from the CAFL (Mycoplasma fermentans, mycoplasma general, HHV5, HHV6 and Babesia). My machine came with a book of 870+ pre-programmed channels, but some of the groups of frequencies are different than what I found on the CAFL, so I have incorporated some of these groups into my treatment.

I also agree with Skyking about rifing too much. Luckily I researched it extensively before starting, so I realized the problems, and have only been running the Lyme freqs 1x a week (only been rifing for Lyme for the last 2 weeks).

I have also used it to run dental/periodontal freqs (upon the recommendation of my LLMD) for cavitations and dental problems that he feels are related to the Lyme. Can't tell what is happening there, but am going on faith that it is working!

BTW -- Skyking, I have received your book and am enjoying reading it. Great information, good job. Congratulations!

If you punch in rife in the search area it will give you a good explanation on one of the posts...... Or skyking has a site listed here with links to rife info.

Some dr.s use them in their office, others don't. Some people stay on abx while using and others don't. It's really your preference. The prices vary from not much to very very expensive.

hope that helps..

My favorite are the electromagnetic devices like the "Doug Coil".

The concept behind Rife devices is that everything has a resonant frequency. Like glass can be shattered with the right frequency, the same applies to everything.

Rife used a special microscope similar to today's dark filed microscope to watch bacteria, cancer, and virus's. He then found what frequency would destroy them.

Rife used a RF carrier so the bacteria could be destroyed at a distance. Most of todays devices have no carrier and hence have a very short range.

The Doug coil device uses a frequency generator (It can be a program running on your computer) a high power 1000 watt audio amplifier like what Rock and Roll bands use, and a BIG coil. Doug used 500 feet of #12 wire for his coil.

I have had very good results with much smaller wire. I use #14 or even #18 wire. The coil gets hot quickly but the treatment time is also very short. I have thought about adding water cooling to my coils.

AND is there any used machines around that would be available?

What do these machines cost new, exactly? You may e-mail me if that is sensitive info.

I have a frequency generator I used prior to my lyme dx which is different than a rife machine I believe. I don't know the exact cost of one but think they run about $1,000.00 - $1,100.00...also depends on what kind you get.

You could try ebay and see if you find a used one. Some people on this board have posted they purchased theres that way.

I made a huge mistake and STOPPED rifing last summer...been paying for it ever since.

Trout

Trout why don't you just rife again if it helped? I should get it tommorow and I'm so excited.

Just Don did you get the sputnik from Semperfi? I used mine with much improvement! That's when I became sold on the idea of being treated by a current...

I'll let you know how it goes after a couple sessions.

Trout, candida first, huh? Good idea..

Thanks all for your input...

Trout why don't you just rife again if it helped? I should get it tommorow and I'm so excited.

Just Don did you get the sputnik from Semperfi? I used mine with much improvement! That's when I became sold on the idea of being treated by a current...

I'll let you know how it goes after a couple sessions.

Trout, candida first, huh? Good idea..

daniella

But I think what you did not pay attention to when rifing is the mercury and other toxic heavy metals that are held in the cell walls of microorganisms, such as candida, etc. As the die-off takes place, if you are still heavy metal toxic, and have not protected yourself to avoid redistribution of the mobilzed metals through rifing, that's what you overlooked or were not aware of. And that can be a big set-back.

If you thought you were "herxing" with rife, you actually were also moving heavy metals. And without protection (such as chlorella or other agents) they settle elsewhere creating problems all over again.

I think I have said this clearly before, - be careful with rife frequencies if you are heavy metal toxic, whether amalgams out or in. The KMT22 that is the brainchild of our doctor is designed in such a way that it can be used regardless, but certain precautions are necessary which I won't go into here.

A rife machine that works with only rife frequencies as the one I think you have, works differently and my doctor will not use it for a variety of reasons. It cannot be used in a clinic setting either. They are way too tough on the patient and do not solve all problems as some people want us to believe. It is erroneous and bad to put out this kind of info to people that are in pain.

A lot has been learned since Rife and the 1930's and inquiring minds have not stopped digging.

In essence: whatever killing agent you use, pills, herbs, frequency devices, light, sound, heat -- in order to avoid further problems, you have to have the right agents on board to hold the metals and take them out of the body.

Most people don't believe they have any such thing as heavy metals in their body and don't pay attention to this. I would agree with them if they have lived on some other planet that is still spanky clean and where there are no dentists! or polluted oceans.

This explains why neither my husband nor I ever had anything even closely resembling what many here call herxes. I simply never had such a thing. One day maybe a bit better than the other, but not intolerable and not lasting for hours on end or even days.

We always from day one of any of our treatments were taking chlorella and other protective agents. It depends on the doctor and patient.

Just something to think about.

Take care.

If you shatter too many too fast = kidney SHUTDOWN...you will destroy healthy kidney cells...and these cannot be repaired.

The kidneys job is to balance the pH...acids and alkalines. They can only work just so fast.

GO SLOW!!! We're talking a ONE MINUTE exposure to the lyme frequency.

Consider running "general frequencies" first...so the bad guys in us (all) don't rear their heads.

A nice big glass of MINERAL water after Rifing might be of help, as it does after a sauna.

This is a POWERFUL machine!!! It SEEMS "innocent". It is not.

The body does NOT heal overnight...ever.

If you were given a bottle of an antibiotic and told to take one pill four times a day, for 10 days, would you take the entire bottle all at once? Think about why this isn't a good idea.

Go slow!

P.S. A state of the art...computer driven Rife unit with an argon light...can run up to $6,000.00.

Learn about these machines BEFORE you purchase one and certainly before you use one! There is a consolidated list of frequencies, updated periodically, on the internet to use as a guide, ie. which frequencies destroy which pathogens.

Since this therapy is "underground", if you want help, you must post your email addy.

Order Skyking's book. It is very easy to read and to understand.

I woke up feeling not so great(really disappointing because I had been getting better).

Anyway the machine came. I did a frequency to stimulate the lymph flow before anything else. About 3 min.

Then I did general well being for 5 min.

I don't really know how to run more than 1 freq. at a time yet.

I was so nervous to touch the handles I thought I would get a shock, but of course I didn't....LOL

I also ran a bunch of frequencies while the amp was off,..lol.. I don't think those ran. So I had to start over....duh...

anyway... I didn't feel much yet. Although I have a filling in 1 tooth thats hurting after and during...interesting

Ok...now you are forcing me to correct myself.

That is good...however, you are wrong.

I was under the care of anART practitioner that was mucle testing me. I WAS doing Chlorella...I WAS muscle testing positive for IV DMPS Drip also....Cilantro and psyllium fiber...I WAS doing GREAT...however, sometimes outside forces become too strong and you are forced to change things..AND I was feeling TOO good...I became overly confident in my health and STOPPED doing what worked.

It was a real stupid thing to do.

The good thing is...I am going back....I am best doing things in phases...the correct phases for ME...are NOT the same for others!!!!!

So.....this time my dear...were wrong. Although...you have been right on otherwise.

I mean come on sister......this IS the TROUTMEISTER we're talking about.

TRout

I feel cruddy today..Maybe from too much rife yesterday..

I only did a little..

I don't understand what you were trying to tell me - whether you did all these therapies together or not, etc., what went wrong, etc. And it doesn't matter. I am often wrong.

What I did note was that you were saying you had a DMPS drip. DMPS has not been given as a drip for years. It doesn't work. It needs to be given as a push or other injection. We got most DMPS together with procaine as neural therapy directly in the areas where the metal deposits were. The administering of these meds is always geared to a certain tempo, some like the Essentiale/phospholipids go very slow, over two minutes, some need some bang bang and are injected quickly.

The timing and sequence of many of these agents is very important; or they will not be as effective. That goes for cilantro, chlorella, garlic, and all the rest. I have posted all the details of each oneof them somewhere, because it is so important. Garlic with a meal doesn't work as intended.
Neither does chlorella after the meal. Cilantro has got to be before chlorella. All that has been learned through experience, and people are surprised if it doesnt work as intended. It's a constant learning and revising for what works best.

I know it's a pain in the neck, but so is mercury and other toxins.

Take care.

Once again..yes it was PUSH NOT drip.
This man is Klinghart trained....and as fanatic about it as the next guy.

I was muscle tested to do it with the prism method of muscle testing, etc...I WAS doing the right things..I jus stopped.

I AM going back that way.

Thanks for keeping an eye on me. I do appreciate it

Danielle,

I have a Jim Bare plasma rife..it has knobs...so it will get knocked out some times.