TerryK
Frequent Contributor (5K+ posts)
Member # 8552
posted
My older dog could care less about the rife machine but my younger dog loves to sit close to it while it is running. She had some serious infections as a puppy and I feel that she currently has low level chronic infections and a depressed immune system.
No one knows with any certainty about the safety of rife for humans let alone animals. I use muscle testing and on rare occassions I find that one or the other dog needs to be removed from the room when using certain frequencies but I can never tell which frequency might be an issue at any given time because it seems to change.
Terry
Posts: 6286 | From Oregon | Registered: Jan 2006
| IP: Logged |
posted
I'm familiar with muscle testing but how do you muscle test a dog?
-------------------- GB 4000 With MOPA
Strength doesn't come from what you can do. It comes from overcoming the things you once thought you couldn't! Posts: 557 | From MI | Registered: Nov 2010
| IP: Logged |
canefan17
Frequent Contributor (5K+ posts)
Member # 22149
posted
Thanks Metallic.
Posts: 5394 | From Houston, Tx | Registered: Aug 2009
| IP: Logged |
canefan17
Frequent Contributor (5K+ posts)
Member # 22149
posted
Abdominal Aortic Aneurysms
Anyone familiar with this? I get this in my gut. A large pulse right in middle of stomach. and I can tell the blood vessels have been weakened.
I suspect Bart but I found this online....
"I do know that the Rickettsias do cause aneurysms. Q-Fever known to cause abdominal aortic aneurysm and RMSF Thoracic aortic aneurysm.
Coxiella burnetti - Q. Fever Fever, malaise, anorexia endocarditis (infection of the heart valves), abdominal aortic aneurysm
- Respiratory symptoms (usually dry) cough, shortness of breath, and chest pain, maculopapular rash
- myocarditis, headache, confusion, and neck stiffness, wheezing can be present in patients with pneumonia, cardiac murmurs
- extreme tiredness and weakness, even after minor exercise, muscle pains, headaches, fever, and depression
Rocky_Mountain_spotted_fever aka Rickettsia rickettsii fever, nausea, vomitting, severe headache, aneurysm (Thoracic), muscle pain, lack of appetite, followed by development of rash"
Posts: 5394 | From Houston, Tx | Registered: Aug 2009
| IP: Logged |
canefan17
Frequent Contributor (5K+ posts)
Member # 22149
posted
So Rickettsia is Q-fever and RMSF?
Posts: 5394 | From Houston, Tx | Registered: Aug 2009
| IP: Logged |
That's some pretty serious stuff! If you think this is a issue (Abdominal Aortic Aneurysm) maybe you should go and get it checked out?
-------------------- GB 4000 With MOPA
Strength doesn't come from what you can do. It comes from overcoming the things you once thought you couldn't! Posts: 557 | From MI | Registered: Nov 2010
| IP: Logged |
canefan17
Frequent Contributor (5K+ posts)
Member # 22149
posted
Well I'm hesitant. I'm really skinny and it seems to happen more when I haven't eaten all day.
But I do understand it's a serious issue.
Just wish I knew the culprit
Posts: 5394 | From Houston, Tx | Registered: Aug 2009
| IP: Logged |
posted
I had that strong abdominal pulse before I got sick. I am a thin person and not much fat covering my abdominal wall so you can see the pulse beating.
Posts: 747 | From Utah | Registered: Apr 2010
| IP: Logged |
canefan17
Frequent Contributor (5K+ posts)
Member # 22149
posted
Wow - just found something VERY interesting.
Bartonella quintana , originally known as Rochalimaea quintana, and , "Rickettsia quintana" is a microorganism.
So Bartonella Quintana (trench fever) is related to Rickettsia or comes from Rickettsia family.
Posts: 5394 | From Houston, Tx | Registered: Aug 2009
| IP: Logged |
canefan17
Frequent Contributor (5K+ posts)
Member # 22149
posted
Kim,
If you pressed on it would it punch back? ha
That's what mine does. And depending on the day it can be a stronger or weaker pulse.
But there's clearly damage where the pulse is. Like vessel damage.
Grrr this symptom bothers me. I know it's Bart too because when I run 832 or 842 I get twitching and/or movement RIGHT on that spot.
That bartonella ba$tard has kicked my a$$ up and down the street for far too long.
Posts: 5394 | From Houston, Tx | Registered: Aug 2009
| IP: Logged |
METALLlC BLUE
Frequent Contributor (1K+ posts)
Member # 6628
posted
May 4th 2011 10:00 AM: This was my 84th Treatment. I waited 48 hours to begin this treatment since the last. I've returned to baseline today, so I began increasing the MSM to double dose: 4gm in the morning. Night sweats are still taking place about once per night. Pain is less since beginning the MSM, but more time is needed. I got outside yesterday to wash my car. First time in a long time. Today I'm tired however. Given the progress, I see repeating the last protocol practical.
1: Purpose: Kill Babesia Species
1: Purpose: Kill Bartonella Like Species
Make: Rife Labs
Machine Model: EMEM3D2
1: Frequency: 1: 570h, 832hz
1: Dose: 30mins each
Distance 1 foot
Location Target: Anterior of Body
Duration: 48 hours
Interval: 1 min
Clothing: Cotton Tee Shirt, Cotton PJ pants
Stomach Content: Empty
Detoxification: MSM 2gm x 2
Water: Trace Mineral Research, 20dp in 64oz Fluid,
Post Water: 16oz filtered
Exercise: 20 push-ups, 20 crunches, 5 pull-ups, and 60 mins on exercise bike
Immediate Effect: During & post treatment: 1: None
Health Function Scale: 35%
24hr: Tired. Baseline function.
48hr: Baseline, no night sweats.
[ 05-06-2011, 09:40 AM: Message edited by: METALLlC BLUE ]
-------------------- I am not a physician, so do your own research to confirm any ideas given and then speak with a health care provider you trust.
mojo
Frequent Contributor (1K+ posts)
Member # 9309
posted
Holy Crap!
I did Lyme, Erlich and Bart yesterday just to tamp it all down (taking next week off while on vaca). I accidentally did one Erlich. freq. for an extra minute and I'm herxing like crazy today!!
And I was hoping for an extra Babs run this week. Oh, Well.
Posts: 1761 | From USA | Registered: May 2006
| IP: Logged |
map1131
Frequent Contributor (5K+ posts)
Member # 2022
posted
I ran some lyme protocols Monday evening. I don't know where I got the freqs but I'm sure it was from this thread.
I'm in my lyme cycle and recognized it Monday.
Oh my did I ever have a big time hit. I had programmed them in my Beam Ray in the last 6 mths and forgot them.
So when I started to go through guide listing I came upon something I named #1lyme and lyme#3 and thought well I'm going to do these together, 27 minutes combined.
Whoa doggie, I've not stirred them up like this in a long long time. Like usual for me it started at the 24 hr mark last night.
It was: 432 612 no sweep or pulse straight up 3 minutes each.
Sweep & pulse each of these 1:30 minutes 271, 289, 671, 737, 7989, 773, 738
So someone here gave me these 2 sessions. Thank you for the herx/healing crisis. I'm about to start heavy duty detox today. Chlorella by the handfuls, detox bath, water, water and rest.
I just realized why my brain fog is bad this morning. My vision is blurry, my neck is killing me and my knees are ticked off. I was putting my White Flower ointment on thick last night.
This thread is amazing.
Pam
-------------------- "Never, never, never, never, never give up" Winston Churchill Posts: 6495 | From Louisville, Ky | Registered: Jan 2002
| IP: Logged |
Used it twice and it's dead. They are sending out a new one.
-------------------- GB 4000 With MOPA
Strength doesn't come from what you can do. It comes from overcoming the things you once thought you couldn't! Posts: 557 | From MI | Registered: Nov 2010
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
Sounds like you really slammed them Pam. It is too bad that you have to suffer because of it.
That is really bad luck Juli. I wonder what part of it is failing? Maybe mine will die soon.
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
mojo
Frequent Contributor (1K+ posts)
Member # 9309
posted
I think 432 and 612 are THE Lyme frequencies! They sure pack a punch dont they??
My herx for Lyme starts anywhere from immediately to 24 hours later. This week it was 24 hours later. BAM!
I'm in my sauna now and drinking electrolytes and trace minerals.
Posts: 1761 | From USA | Registered: May 2006
| IP: Logged |
posted
Don't know Dan, can hear the fan running but the ray tube or green light on the MOPA isn't on. Meter don't register either.
Maybe the Big Guy upstairs don't want me to use the MOPA just yet? LOl!
How long have you've had your MOPA Dan?
Mojo, I use 612 432 and 2016 when I rife Lyme. I rifed these freqs just before my MOPA died and I really pushed my time so I'll probably be herxing off the charts in about 36 hours. Yikes!
-------------------- GB 4000 With MOPA
Strength doesn't come from what you can do. It comes from overcoming the things you once thought you couldn't! Posts: 557 | From MI | Registered: Nov 2010
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
I have had the MOPA for just about a year. No problems with it yet.
612 Hz and 2016 Hz have always worked well for us. I never got much response to 432 Hz, although most people do, and it is one of the better tested frequencies.
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
canefan17
Frequent Contributor (5K+ posts)
Member # 22149
posted
Doug Coil Users
I tried running 120 and the amps meter wouldn't go past 3 amps
I read through John's notes and he acted like this is common. But 3 amps seems really low. And I didn't turn it too far for fear of something exploding or something hahaha
Anyone have experience with below 220 hz ?
Posts: 5394 | From Houston, Tx | Registered: Aug 2009
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
You could just run a higher harmonic by doubling the frequency until it is in a better range for that machine.
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
canefan17
Frequent Contributor (5K+ posts)
Member # 22149
posted
I wonder if it makes a difference that it's Parasites I'm targeting.
So it shouldn't make a difference if it were 120, 240, or 600 ?
Because 600 is a Doug Frequency And a broad-spectrum freq on CAFL
Yet on the CAFL site... 600 makes no mention of parasites.
See that I don't get. If it's a higher harmonic - it should still hit parasites
Posts: 5394 | From Houston, Tx | Registered: Aug 2009
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
It might not work as well as a higher harmonic. It is hard to know, because that frequency is listed at that exceptionally low frequency. This is where I would like to know the history of how that frequency came about.
If the testing was done on a plasma machine, it very well could be a that the killing frequency is a higher harmonic of 120 Hz. If it was done with a coil machine, the killing frequency would be 120 Hz.
I do see that 240 is also a parasite frequency, so maybe that is about as high as you can go?
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
For those who are not progressing well with treating Lyme and Co-infections directly, it is worth reading the "Introduction to the Electroherbalism Frequency Lists".
There the frequencies that work for large numbers of pathogens and conditions are listed.
One particular statement there makes a lot of sense to me.
quote:The CAFL attempts to deal with this problem by providing notes of other frequency sets which may help. Despite filtering, some of the sets contain only general frequencies such as 727/728, 784/787, 464, and 880 when those are the only ones which have been used and found to help. These four frequencies do address a wide range of bacteria, viruses, and fungi. In this respect they may nonetheless help almost any infectious process by removing common pathogens and therefore assisting the immune system since there will be more cells available to concentrate on the "uncommon" pathogens which were not directly addressed in the set. Many people run these four general frequencies in every set regardless of the condition.
I personally feel that the immune system is hugely important in recovering from Lyme Disease or any disease for that matter. The less it has to deal with common nuisance pathogens, the more it can help with the tough ones like Lyme.
I am fairly certain the immune system has to prioritize its work in some way. It cannot over come everything at one time. There are also other pathogens that weaken the immune response besides Lyme.
It may be worth your while to use these general sets on occasion, to make sure some other infection is not holding back progress.
Just another idea, but we all know something or another often stops progress, no matter what treatment method is used. This may be part of the reason.
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
canefan17
Frequent Contributor (5K+ posts)
Member # 22149
posted
Thanks for the help Dan.
So in general why do lower frequencies require less AMPS to run em? Simply because they require less power to be effective?
Posts: 5394 | From Houston, Tx | Registered: Aug 2009
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
You would have to ask an electronics guru. I am not particularly talented at electronics. It actually is one of my worst subjects, but I am slowly learning.
I suspect that the power consumption for your setup is more specific to the components it is using.
It is designed to drive speakers, so its circuitry revolves around that application. How the coils affect that, is over my head.
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
posted
Has anyone successfully treated chlamydia pneumonia and if so, what frequency did you use and how often did you treat?
Posts: 55 | From Oregon | Registered: Mar 2010
| IP: Logged |
METALLlC BLUE
Frequent Contributor (1K+ posts)
Member # 6628
posted
May 6th 2011 10:00 AM: This was my 85th Treatment. I waited 48 hours to begin this treatment since the last. I woke up tired but after about 1hr I improved. I had no night sweats last night but nothing of significance beyond that. I continue to take 4gm of MSM. Today I'm going after Borrelia Burgdorferi since I've seen no change with 832.
1: Purpose: Kill Babesia Species
1: Purpose: Kill Borrelia Burgdorferi
Make: Rife Labs
Machine Model: EMEM3D2
1: Frequency: 1: 570h, 612
1: Dose: 30mins each
Distance 1 foot
Location Target: Anterior of Body
Duration: 48 hours
Interval: 1 min
Clothing: Cotton Tee Shirt, Cotton PJ pants
Stomach Content: Empty
Detoxification: MSM 2gm x 2
Water: Trace Mineral Research, 20dp in 64oz Fluid,
Post Water: 16oz filtered
Exercise: 25 push-ups, 25 crunches, 6 pull-ups, and 60 mins on exercise bike
Immediate Effect: During & post treatment: 1: None
Health Function Scale: 40%
24hr: Less pain, baseline fatigue. No night sweats.
48hr: Aches, baseline. Sweats present at night.
[ 05-08-2011, 10:07 AM: Message edited by: METALLlC BLUE ]
-------------------- I am not a physician, so do your own research to confirm any ideas given and then speak with a health care provider you trust.
Jeff is fast! Called him Weds when my MOPA died and today I received the new one!
I see it cost him $61.00 to ship. Looks like he goes the extra mile to take care of his buyers!
-------------------- GB 4000 With MOPA
Strength doesn't come from what you can do. It comes from overcoming the things you once thought you couldn't! Posts: 557 | From MI | Registered: Nov 2010
| IP: Logged |
canefan17
Frequent Contributor (5K+ posts)
Member # 22149
posted
Juli
did he say why the MOPA died?
Posts: 5394 | From Houston, Tx | Registered: Aug 2009
| IP: Logged |
posted
No. He seemed puzzled that it quit again. I think he had installed a new board the first time.
He said he was going to compelely rebuild it at this point.
I hope Dan didn't get the last of the good ones! Lol! I'll find out soon enough.
-------------------- GB 4000 With MOPA
Strength doesn't come from what you can do. It comes from overcoming the things you once thought you couldn't! Posts: 557 | From MI | Registered: Nov 2010
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
Sounds like a power supply problem. That often goes bad on computer anyway.
Electronics are like that. If they work good for three months, they probably will be good for many years.
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
METALLlC BLUE
Frequent Contributor (1K+ posts)
Member # 6628
posted
quote:Originally posted by canefan17: Metallic,
When do you get your DC?
Whenever John get's to it I guess.
-------------------- I am not a physician, so do your own research to confirm any ideas given and then speak with a health care provider you trust.
lymielauren28
Frequent Contributor (1K+ posts)
Member # 13742
posted
Hey all, Haven't been on in a long time - I've enjoyed going through all the old posts:) I've continued to make a lot of progress over the last year but have definitely hit some walls here and there. My latest wall has been bartonella and trying to get a handle on it again as it seems to be getting out hand.
When I first starting rifing for Bart last spring after my reinfection I was rifing for it about 3 times a week. Over time my symptoms pretty much vanished and I got a little lazy:) For the past couple of months I've hit it maybe once a week and sure enough my Bart symptoms have come roaring back at me.
Bart seems to reproduce so fast! I think I'm going to hit it every day as I see some of you have been doing just that - I'll let y'all know how it goes. For me personally the Bart tends to hide out mainly in my legs...when I get a bad flare my bones literally ache in my lower legs. If I don't treat immediately within a few hours the ache turns into sharp pains in my bones and then spreads into the muscles and I begin to get severe air hunger.
I know most associate air hunger with babs but this is definitely Bart related for me. When I do rife for Bart all symptoms subside within about a half an hour and I only feel better, no herx. However it only seems to take about three days after treating for symptoms to start creeping back in:(
Wondering if anyone else here has dealt with severe bone pain?
-------------------- "The only way out is through" Posts: 1434 | From mississippi | Registered: Nov 2007
| IP: Logged |
canefan17
Frequent Contributor (5K+ posts)
Member # 22149
posted
Lymielauren
That's me to a T right now. You're doing the right thing. Hit Bart more often
Also - your mailbox is full
Posts: 5394 | From Houston, Tx | Registered: Aug 2009
| IP: Logged |
quote:Originally posted by Chinalymie: Cane I think the reason for 10 minutes of coil over the liver for babs is the high blood flow in the liver. The idea is getting all of the body's blood well treated.
First post here so hope this works OK.
Babesia is found inside red blood cells. The spleen is the organ that removes old red cells from circulation. Does anyone coil the spleen area (left torso under rib cage)?
Posts: 9 | From Illinois | Registered: Jul 2009
| IP: Logged |
Bart seems to reproduce so fast! I think I'm going to hit it every day as I see some of you have been doing just that - I'll let y'all know how it goes.
I have read on other groups that people coil 2x a day for Bart since it reproduces so quickly.
Posts: 9 | From Illinois | Registered: Jul 2009
| IP: Logged |
posted
[QUOTE]Originally posted by METALLlC BLUE: [QB] I still have not heard from John Stoller. Does anyone know him personally or have contact with him recently? I haven't heard from him since March 23rd, and it's now April 19th. Is he hospitalized? On vacation? What's going on?
I just spoke with John earlier this week. He took a couple weeks off since he was so burnt out. He's back now. Have you been able to get in touch with him?
Posts: 9 | From Illinois | Registered: Jul 2009
| IP: Logged |
posted
Bart hits my bones too! Legs and feet mostly! Same kind of pain.
I'm gaining on rifing only twice a week but planning on more once I can.
To many bugs on my plate right now. Lol!
-------------------- GB 4000 With MOPA
Strength doesn't come from what you can do. It comes from overcoming the things you once thought you couldn't! Posts: 557 | From MI | Registered: Nov 2010
| IP: Logged |
METALLlC BLUE
Frequent Contributor (1K+ posts)
Member # 6628
posted
quote:Originally posted by dlfs1957: [QUOTE]Originally posted by METALLlC BLUE: [QB] I still have not heard from John Stoller. Does anyone know him personally or have contact with him recently? I haven't heard from him since March 23rd, and it's now April 19th. Is he hospitalized? On vacation? What's going on?
I just spoke with John earlier this week. He took a couple weeks off since he was so burnt out. He's back now. Have you been able to get in touch with him?
Yes
-------------------- I am not a physician, so do your own research to confirm any ideas given and then speak with a health care provider you trust.
METALLlC BLUE
Frequent Contributor (1K+ posts)
Member # 6628
posted
May 8th 2011 11:00 AM: This was my 86th Treatment. I waited 48 hours to begin this treatment since the last. Woke up at baseline of 35%, no "big" progress made. I will increase to 5gm of MSM. Today I'm going after Borrelia Burgdorferi & Babesia. I'm going to increase the Babesia Harmonic of 570 to 1140 and use 2016 for borrelia.
1: Purpose: Kill Babesia Species
1: Purpose: Kill Borrelia Burgdorferi
Make: Rife Labs
Machine Model: EMEM3D2
1: Frequency: 1: 1140hz, 2016
1: Dose: 30mins each
Distance 1 foot
Location Target: Anterior of Body
Duration: 48 hours
Interval: 1 min
Clothing: Cotton Tee Shirt, Cotton PJ pants
Stomach Content: Empty
Detoxification: MSM 3gm Morn - 2gm Night
Water: Trace Mineral Research, 20dp in 64oz Fluid,
Post Water: 16oz filtered
Exercise: 25 push-ups, 25 crunches, 6 pull-ups, and 60 mins on exercise bike
Immediate Effect: During & post treatment: 1: None
Health Function Scale: 35%
24hr: 30%. Felt faint and fluish. Lightheaded and sickly. Couldn't eat dinner.
48: Felt "hung over" and have had insomnia last two nights.
[ 05-10-2011, 10:43 AM: Message edited by: METALLlC BLUE ]
-------------------- I am not a physician, so do your own research to confirm any ideas given and then speak with a health care provider you trust.
posted
Hello Rifers. I want to use my GB4000 for the first time, and need to know what settings I should use.
I have been on abx for 3 plus years, plus 5 months of herbals. I am better, but it's time to change.
I have the GB 4000 plus amp. I would like to start out slowly until I see how bad the herxes are.
Thanks in advance!
Posts: 79 | From Northeast US | Registered: Sep 2009
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
Hello, and welcome to the thread.
I would check the settings on your machine before you start. Make sure the duty cycle setting is at 90.
Then check the gating settings. The gating rate can be most any number, but I use 20 quite often, but that makes an annoying tube strobing effect, so I sometimes run 200 instead.
The gating duty cycle should be 50% and leave it there for any treatment.
Gating should always be used when trying to kill a pathogen. For other frequencies such as 10,000 Hz for swelling, you do not need it on.
Now that all your settings are double checked, you can try a single frequency for a minute, no more than two minutes.
There are two that are easy and effective that I have always used. 612 Hz and 2016 Hz. I would try one or the other and see what happens.
Let us know how it works, and good luck.
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
lymielauren28
Frequent Contributor (1K+ posts)
Member # 13742
posted
Rifed last night on 8320 for Bart about 10 min total and man do I feel blah today. Blah and lots of muscle twitching. The most interesting thing was that my boyfriend was curled up on the couch with me during my treatment - this morning he gets out of bed and says he feels like he's been run over by a truck. I asked him to elaborate and he said "everything hurts"..."my ribs are sore, my kidneys ache and my joints and muscles hurt". Hmmmmmmm.
Let me tell y'all that in the last 3 months or so he's always complaining about something...headaches,no energy,muscle soreness,joint pain, and the big one - anxiety. Before about 3 months ago he didn't know the meaning of anxiety. He had his first panic attack right after new years and I had to take him to the ER because he thought he was dying. He's had several more episodes since then and his anxiety got so bad at one point that he went to his primary care doc who promptly put him on Xanax and antidepressants. (What a surprise!). The antidepressants just made his anxiety worse so he didn't take them for long.
Sounds to me like a classic case of bartonella with a classic herx. When I told him as much he said, "I don't have bart-a-whatever-the-hell-you-call-it" and that was the end of that discussion. Denial? I think so:) I'm going to accidentally rife him regularly and see if I can illicit anymore reactions.
Juli, interesting that we have the same symptoms. Who knows how many strains of this crap there are! Canefan clearing my inbox now. Happy rifing!!!
Lauren
-------------------- "The only way out is through" Posts: 1434 | From mississippi | Registered: Nov 2007
| IP: Logged |
canefan17
Frequent Contributor (5K+ posts)
Member # 22149
posted
Lauren,
Panic attacks for me in HS were (imo) my first Lyme signs.
I also had major fatigue (this was before CFS became popular)
My mom and grandpa tried pouring water on me some mornings lol
I'd get your b/f tested NOW! What can it hurt?
Posts: 5394 | From Houston, Tx | Registered: Aug 2009
| IP: Logged |
This is a partial copy of my post on another topic but I would like if you rife folks could weigh in on it.
I am currently treating for Babs and Lyme with high doses of mepron ceftin and biaxin but bart continues to be a big issue for me.
The thought has crossed my mind to try address bart with some kind of herb or power up the rife machine I built but haven't had the guts to try with any consistency yet. The machine definately invokes a response but I'm told Bart herx's can be hell. I can't afford to miss any more work that I already do. Thankfully my company seems to understand the complexity of all of this but no doubt there is a limit.
Any thoughts??
-------------------- If you play at the beach, expect to get some sand in your shorts Posts: 223 | From central pa | Registered: May 2010
| IP: Logged |
I have 3 infections so far that I know of. I can't afford a herx from rifing the 3rd so what I do is rife the Myco infection just under "The Herx Zone" as I call it. It is working for me.
I started out by rifing this infection for 45 seconds a week. I upped the rifing time slowly every 3rd treatment or so by 15 seconds. I can now rife twice a week or more.
I had reacted strongly to the Myco freq's 690 Hz and 880.2 Hz when I first tested them out so I knew I had to take it slow.
Who knows maybe I'll be able to treat this infection without ever herxing in the long run. So far so good!
-------------------- GB 4000 With MOPA
Strength doesn't come from what you can do. It comes from overcoming the things you once thought you couldn't! Posts: 557 | From MI | Registered: Nov 2010
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
I would hammer on the Babesia with frequencies for sure. Hit it while it is under stress from the antibiotics. Maybe it will be eliminated that much faster.
Bart treatment can be one nasty experience, but Juli has a good idea in a controlled treatment, keeping things bearable.
Lots of anti-inflammatory supplements can help.
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
METALLlC BLUE
Frequent Contributor (1K+ posts)
Member # 6628
posted
May 10th 2011 11:00 AM: This was my 87th Treatment. I waited 48 hours to begin this treatment since the last. Woke up at baseline of 35%, no "big" progress made. I will increase to 5gm of MSM. Today I'm going after Mycoplasma species. As I increase the MSM I've been feeling worse the last two days, fluish, sweats, fatigue. May be a detox reaction. Symptoms were improving until each time I increased the dose. Will continue on.
1: Purpose: Kill Mycoplasma Species
Make: Rife Labs
Machine Model: EMEM3D2
1: Frequency: 1: 690hz, 880hz
1: Dose: 30mins each
Distance 1 foot
Location Target: Anterior of Body
Duration: 48 hours
Interval: 1 min
Clothing: Cotton Tee Shirt, Cotton PJ pants
Stomach Content: Empty
Detoxification: MSM 3gm Morn - 2gm Night
Water: Trace Mineral Research, 20dp in 64oz Fluid,
Post Water: 16oz filtered
Exercise: 20 push-ups, 20 crunches, 5 pull-ups, and 60 mins on exercise bike
Immediate Effect: During & post treatment: 1: None
Health Function Scale: 35%
24h: Felt worse from lack of sleep: 30%.
48hr: Still feel pretty run down but better than yesterday, about 35%
[ 05-12-2011, 07:54 AM: Message edited by: METALLlC BLUE ]
-------------------- I am not a physician, so do your own research to confirm any ideas given and then speak with a health care provider you trust.
The Lyme Disease Network is a non-profit organization funded by individual donations. If you would like to support the Network and the LymeNet system of Web services, please send your donations to:
The
Lyme Disease Network of New Jersey 907 Pebble Creek Court,
Pennington,
NJ08534USA http://www.lymenet.org/
UBBFriend: Email this page to someone!
![[Smile]](smile.gif)
Printer-friendly view of this topic