CD57
Frequent Contributor (1K+ posts)
Member # 11749
posted
Thanks Jarjar! I bookmarked this page.
Posts: 3528 | From US | Registered: Apr 2007
| IP: Logged |
mojo
Frequent Contributor (1K+ posts)
Member # 9309
posted
Thanks jarjar - I'm going to use the ones that are "new" to me right now. I'm already using all the others.
Posts: 1761 | From USA | Registered: May 2006
| IP: Logged |
springshowers
Frequent Contributor (1K+ posts)
Member # 19863
posted
Thanks Jarjar for the great links and info!!
Posts: 2747 | From Unites States Of America | Registered: Apr 2009
| IP: Logged |
springshowers
Frequent Contributor (1K+ posts)
Member # 19863
posted
As I wrote above I have been using my LEDs for various things.
Eye sight (blurry vision) and Body Pain mostly so far.
For eye sight I rotate the red and green LEDS and use the numbers I have been gathering of
20 350 360 727 787 880 1600 5000 10000
Can not give a "result" yet on eyes but each time I do anything for eyes like this my eye balls are blood shot all the next day and poofy and inflamed too. (I feel its an eye treatment herx)
Also though when using LEDs for Pain the relief is immediate. It is quite amazing and if I have a sort or tight neck or shoulders I use the LED and I get relief quickly. NOt able to get overall pain relief but can narrow on specific spots. Also for any knee or wrist type joint pain and also elbows.
The joint pain though for me does only comes on after certain rifing sessions. (more deep level herxing I think)
Anyway... Thats just a bit of an outside update..
My eye sight has gotten much worse during this disease and even peaked during certain lyme killing treatments (mostly for protozoan and or parasites)
I hope to regain some of that while I heal. It has gotten better somewhat already during my overall treatment but certainly I still do wear my reading glasses quite a bit.
I am sure some of the blurry vision is natural due to my mid 40s age too... But I still hope to get some improvement still ....
WE will see.!!
Pardon the Pun! : )
[ 07-20-2010, 06:25 PM: Message edited by: springshowers ]
Posts: 2747 | From Unites States Of America | Registered: Apr 2009
| IP: Logged |
posted
Hmmmmm, I never thought of eye sight being related. I was blaming it on wearing glasses as I heard they will just get worse with them.
My eye sight was great until mid 40's and then it was so mildly affected that I just got glasses because I was doing counted cross-stitch.
My family acted with shock that I now wear 2.25 (as prescribed by my optometrist). I am due for another eye exam, but the ophthalmologist is keeping me busy for now.
It would be very cool if my vision were to improve. I can't do much w/o my eyeglasses. I only have an EMEM, but I can hope.
Posts: 472 | From NJ | Registered: May 2009
| IP: Logged |
mojo
Frequent Contributor (1K+ posts)
Member # 9309
posted
When I was first diagnosed I spoke with a gal who was in remission.
During her illness her eyesight kept getting worse and she said she was wearng "coke bottle" glasses. Her sight went back to her old perscription as she became well.
Posts: 1761 | From USA | Registered: May 2006
| IP: Logged |
posted
So... what happens to those of us who have had cataract surgery??? Nothing I hope now that I have very good vision with artificial lenses
-------------------- "His faithful love endures forever." Psalm 136 Posts: 189 | From MN | Registered: Dec 2007
| IP: Logged |
mojo
Frequent Contributor (1K+ posts)
Member # 9309
posted
Faith - Lyme & Company doesn't seem to be affecting my eyes at all so I don't think it necessarily affect eveyone (thankfully)
Posts: 1761 | From USA | Registered: May 2006
| IP: Logged |
seekhelp
Frequent Contributor (5K+ posts)
Member # 15067
posted
I definitely think it has affected mine.
Posts: 7545 | From The 5th Dimension - The Twilight Zone | Registered: Mar 2008
| IP: Logged |
CD57
Frequent Contributor (1K+ posts)
Member # 11749
posted
Dan -- just had a long conversation with AAA Productions, who you know. Re the DNA frex, he was surprised that the ones I had purchased were lowish numbers, under 1000 and said that I should try to get up higher and that DNA Frex usually provides the higher numbers for you.
Do you know if I am to do my own multiplication or if they came already adjusted for my machine? How high should I try to get? I don't have the MOPA.
Posts: 3528 | From US | Registered: Apr 2007
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
Char converts the number to low frequencies so any machine can run them. They can be converted higher, which is what I normally will do. I had better results with higher frequencies.
The GB-4000 has a square wave limit of 40,000 Hz, so I would convert them just under that limit.
Char has a frequency conversion program that is pretty simple to use, and she will send it to you free if you request it. She does this for anyone who purchases her frequencies.
You can also download this program to convert them.
Been reading the threads and wow...alot of info. Thanks to everyone. My son (19) has lyme, but only mentally...no physical pain that we know of. Diagnosed 6 months ago, been getting worse each month. The only thing he says is "its good" no matter what we ask. He's very confused, memory loss...gets lost in the house. So, we have been using a BioSolutions machine loaned to us about a month ago, at first we did it everyday because the person who loaned it to us said thats what he did but lately we have reduced it to 3-4 times a week after reading more. We run a #26 frequency for 30 minutes, says for Lyme in book. Since my son doesn't or can't explain how he feels what would be suggested to use on him for now and for how long...times per week? Been reading alot about numbers 570, 20, 27, 76, 790, 832. Should I do these for 10 minutes each, say 3 times a week? Also been doing a #237 (preprogrammed #) almost everyday, says its for Detox. Its difficult to know what to do since he cannot converse to us. Any suggestions would be greatly appreciated...thanks
Posts: 158 | From NJ | Registered: Jul 2010
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
Are all of his mental problems from Lyme? That is pretty scary if it is.
I would say someone that age can take more treatment than an older person, but his detox abilities are unknown so that complicates things.
I recommend 612 Hz for active Lyme, and 2016 Hz for cyst form. 832 Hz for Bartonella.
I would play it safe and only treat two days a week at first. Hopefully you can get some idea of his reaction by his behavior. That should be enough to gain on it over time.
I would slowly increase the run time to twenty minutes for each frequency. I would not use the preprogrammed frequencies because many of them do the same thing, and some probably do not work at all.
I would also reduce inflammation as much as possible to hopefully restore some of his mental abilities.
One thing I would use for sure is Turmeric as it prevents arterial plaque build up. It also is anti inflammatory. Krill Oil is a good choice also. Both thin the blood slightly which can only help.
Magnesium is a must for anyone with Lyme, or even without Lyme.
I hope you can get some improvement soon. It takes time, but the Biosolutions machine does work fairly well.
Good Luck
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
posted
thank you Dan. I'm going to start with the numbers you suggested and will post how's he's doing. Just an FYI: He is being treated by both a LLMD and a psychiatry. Been giving him lemon water each day and do detox foot baths. Tested positive for all bands back in 12/09.
Posts: 158 | From NJ | Registered: Jul 2010
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
I was going to say, he really needs the supervision of a doctor given his unusual symptoms. I am glad he has that going for him.
I think you will gain on this but it will take months to do it. When you get to the point of substantial improvement, you will have to use a more powerful frequency device to get rid of the remainder of the Lyme. But you have enough power to go a long ways right now.
Keep us posted on progress or lack of it. It may help others out.
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
posted
I have a list of bartonella frequencies. Most are a list of individual frequencies but a couple seem to be linked, like 21-27. Does this mean I am supposed to do a sweep of these frequencies or maybe program them individually? I don't think the BCX can sweep like that.
Sheryl
Posts: 258 | From Spokane, WA | Registered: Oct 2008
| IP: Logged |
mojo
Frequent Contributor (1K+ posts)
Member # 9309
posted
I'm only using the ones I got with my machine for now:
Erlichia 336, 347, 366, 385, 395, 749
Once I stop herxing I will try the others, too.
I am doing the same thing with Lyme Freq - slowly adding new ones in.
I can do ALL Bart frequencies found here with no extra herx - but I feel well afterwards.
Posts: 1761 | From USA | Registered: May 2006
| IP: Logged |
posted
Question for you gb4000 users. I just did a sweep for 20-27 and the red RF light blinked the entire time. I am hoping it is just blinking because I am working with such low numbers. The higher numbers don't blink on a sweep. Anyone else had this experience or could they program in that sweep and see if the light blinks then just clear it and stop so I will know if my system is working okay. thanks jay
Posts: 805 | From Utopia | Registered: Feb 2006
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
I do not think Bart needs to be swept. But it does not hurt to sweep it once you think you have eliminated it, just to make sure.
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
CD57
Frequent Contributor (1K+ posts)
Member # 11749
posted
Dan you haven't been doing sweeps on 832?
Posts: 3528 | From US | Registered: Apr 2007
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
I have done sweeps using 832, but I have also run without the sweep. If you are getting die off with just 832 Hz it most likely is getting all of it.
If you have the ability to sweep, then I would use it in a very small sweep. 831 to 833.
When using a sweep you should run longer than just a single frequency to compensate for the times you are missing the target frequency. The variation, if there is any, is likely very small.
I do have the habit of sweeping most anything I treat. I will run the straight frequency for a while, and then sweep just as a precaution. Most of the time it is probably not needed, but how can you know for certain?
Cyst form Lyme does seem to need a small sweep. I ran the straight 2016 frequency for quite a while and when it quit giving a response, I started sweeping it. The reactions started again when I did this.
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
springshowers
Frequent Contributor (1K+ posts)
Member # 19863
posted
I was wondering the other day if anyone has heard from Metallic Blue. I have not seen him around or on the rife thread either. I know he had been starting to rife and or at least getting started.
Please let us know if anyone knows where he is or if he is ok and such.
Blessings
Posts: 2747 | From Unites States Of America | Registered: Apr 2009
| IP: Logged |
CD57
Frequent Contributor (1K+ posts)
Member # 11749
posted
Was wondering too...?
Thanks for the sweep info. What is the minimum number of minutes for a treatment, per frequency, Dan or anyone?
Posts: 3528 | From US | Registered: Apr 2007
| IP: Logged |
CD57
Frequent Contributor (1K+ posts)
Member # 11749
posted
Sheryl etc.....re ehrlichia, what are the symptoms of it? all you ever read about is muscle pain and fatigue (nebulous).
Has anyone rifed for ehrlichia and gotten hits?
Posts: 3528 | From US | Registered: Apr 2007
| IP: Logged |
metallic blue's mailbox is full and he hasn't made a post since this spring so I don't think he has been hanging around the board recently.
Posts: 805 | From Utopia | Registered: Feb 2006
| IP: Logged |
I recently posted about my son and received great advice from D Bergy, problem is I tried the frequencies suggested: 612, 2016 and 832 but none work on the BioSolutions machine, comes up invalid number. Any suggestions? Using #26 frequency, in book says for lyme.
Posts: 158 | From NJ | Registered: Jul 2010
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
I do not know how the biosolutions machine works, as I have not used one, but there must be a way of inputting your own frequency.
I think you are trying to put in a code which is just to run whatever they have preprogrammed into the machine for any given condition.
I am speculating that there is a way of running your own individual frequency, or a way to create your own program using the frequencies you choose.
Do you have the manual that came with it?
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
CD57
Frequent Contributor (1K+ posts)
Member # 11749
posted
Dan -- I finally think i figured out the Harmonic Calculator. I had to get someone to help me. Now....the GB4000 goes up to 20megahertz per frequency I think....that's 20,000,000 hertz.
So in theory you want the highest frex under 20,000,000?
Posts: 3528 | From US | Registered: Apr 2007
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
The 20,000,000 Hz is for a sine wave, but you certainly can use a sine wave if you want to, but gating is likely even more important using a sine wave. I would make sure you are using the gating feature with a sine wave.
The rise and fall time of a square wave is more abrupt, and it is this quick switch which is thought to be destructive to the bacteria.
Gating breaks up the frequency which produces more of this effect, plus a rapids deionization of a plasma tube. The deionization does not play a role in a contact device.
Rife used a sine wave in his early machines, and it worked with gating. He did not have the option of a square wave at that time.
The square wave limit of the GB-4000 is 40,000 Hz.
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
CD57
Frequent Contributor (1K+ posts)
Member # 11749
posted
Must gating be used with a square wave?
Posts: 3528 | From US | Registered: Apr 2007
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
It does not have to be used, but it most likely makes it more effective.
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
CD57
Frequent Contributor (1K+ posts)
Member # 11749
posted
quote:Originally posted by CD57: Must gating be used with a square wave to be more effective?
posted
Hi, yes I can put in my own frequency, #26 is a frequency. I do have the book with frequencies but they don't go up that high in numberic form. thank you for your help....I know the BioSolutions is an older machine, maybe that's why. I will be buying my own machine as soon as I can save the money for one, was thinking of buying the GB4000, seems user friendly.
Posts: 158 | From NJ | Registered: Jul 2010
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
I believe the Biosolutions machine works on coded frequencies. In another words, when you input #26 the machine is not running 26 Hz. Although there may be a way of just running 26 Hz also.
If this conversion chart (at the bottom of the NCFL )is correct, when you run #26 it means the machine is outputting frequency 625 Hz.
This is why I never recommended this machine because it hides the actual frequency running making it unnecessarily complicated, and limited in use. The GB-4000 is far more versitile.
I wish I had one of these machines to look at, maybe I could help more.
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
posted
CD57, I wanted to program erlichia frequencies into my rife machine and that is why I asked for them. I believe I had or have erlichia because I really reacted to the A-BIO drops given out at G. Medical in S.R. I think my head was spinning and I was disoriented and off balance. I do not have joint problems, mostly neuro.
I've been using my BCX Ultra a lot since I got it a few days ago and seem to be improving. A little early to tell. It's really good for clearing up my sinuses and insomnia.
Posts: 258 | From Spokane, WA | Registered: Oct 2008
| IP: Logged |
1. is this something that could be done with young children?
2. Is it possible to just do rife and herbs and never do abx?
Posts: 34 | From St. Louis | Registered: Jun 2010
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
You can use it for young children, and has been for Lyme, but most people will not publicly post when doing so.
To the best of my knowledge, it has never harmed anyone, but it is experimental, and that means it has not had the extensive testing needed to ferret out any possible complications.
My wife used Cumanda and Samento to start out with, and then started frequency treatments. We tried MMS and Spiro, but all of these caused stomach problems or yeast problems, so they could not be used long term.
She never has used any pharmaceutical antibiotics.
Frequency treatments have been the one thing that did not have a negative side effect, so we stuck with it. She is symptom free, and it is a good thing, because my GB-4000 is on the blink right now.
Yes, it is possible to do frequency treatment with herbs or no herbs.
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
posted
My LLMD thinks that rife and ultrasound shouldn't be used within 7 days of each other. Has anyone else heard of this?
-------------------- "His faithful love endures forever." Psalm 136 Posts: 189 | From MN | Registered: Dec 2007
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
I think any frequency has the potential to stir up the Lyme and maybe even some co-infections.
I finally got around to a Lyme treatment. Unfortunately it did bring some uncomfortable results while running them. Particularly the 612 Hz harmonic program, so spirochetes are still around, and the Lyme is not all gone.
That was not too surprising to me, but the 832 Bart frequency also brought some bottom of the foot pain and lower back pain. Bart not all gone either. That did surprise me.
She still has no symptoms, but only because her immune system is not detecting the Lyme, or at least I have no indication it is fighting it.
I have some more work to do, but I now know it will take longer to eliminate it. I may incorporate the Lyme DNA frequencies again into the treatment. I have never used them with the MOPA and maybe I should see how they work with lots of power.
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
posted
Dan -- I think you should run the DNA frequencies with the MOPA. That would be bringing out the big guns.
Posts: 379 | From Sydney, Australia | Registered: Nov 2008
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
I may do that, but she is suffering a bit from yesterdays treatment, so I will have to wait a day or two.
It gained some ground in that short time of no treatment. I won't let that happen again. If I would not have had trouble with the GB-4000, I would have treated earlier.
I will get it in the end. I will not be beaten by a bacteria. Just a little more refinement of the treatment.
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
tick battler
Frequent Contributor (1K+ posts)
Member # 21113
posted
Dan,
I'm curious - how long did you go this time between treatments? I'm wondering how long it took to come back.
I agree - we are smarter than those bactria. We will win!
tickbattler
Posts: 1763 | From Malvern, PA | Registered: Jul 2009
| IP: Logged |
D Bergy
Frequent Contributor (1K+ posts)
Member # 9984
posted
June 27th was her last treatment prior to last night, so it was a month ago.
The only other time we went that long without treating was when she had a high fever from another infection, and it killed off quite a bit just from the fever.
Dan
Posts: 2924 | From Minnesota | Registered: Aug 2006
| IP: Logged |
CD57
Frequent Contributor (1K+ posts)
Member # 11749
posted
Sheryl777, is A-bio GMA's latest for ehrlichia?
Posts: 3528 | From US | Registered: Apr 2007
| IP: Logged |
The Lyme Disease Network is a non-profit organization funded by individual donations. If you would like to support the Network and the LymeNet system of Web services, please send your donations to:
The
Lyme Disease Network of New Jersey 907 Pebble Creek Court,
Pennington,
NJ08534USA http://www.lymenet.org/
UBBFriend: Email this page to someone!
![[Smile]](smile.gif)
Printer-friendly view of this topic